CCA Stainless Steel Centrifugal Pump(Monoblock with extended motor shaft)

Category:

CENTRIFUGAL PUMP

Message

Products

Product Details

Commodity name: CCA Stainless Steel Centrifugal Pump(Monoblock with extended motor shaft)

Operating Conditions:

clean, non flammable and explosive liquid without solid

particles and fibers;

Medium temperature:

standard model: - 20℃ ~ + 70℃ ;

high temperature: - 20℃~ + 104℃ ;

maximum ambient temperature + 50℃ ;

the maximum installation altitude is 1000m;

the maximum working pressure is 10 bar.

Curve condition

The guidelines below apply to the curves shown on the following pages:

1)Curve tolerance as per iso9906 shown,the thick line

indicates the recommended use range. If it is used beyond

the curve range, there will be a risk of overload.

2)All curves are based on the measured value of motor speed

at 2900 r/min.

3)The curve is measured in clean water without gas and

solid impurities at a temperature of 20 .

4)The pump shall not operate at a flow rate less than 10% of

the flow atthe optimal efficiency point to avoid the risk of

overheating.

5)If the density or viscosity of the conveying liquid is greater

than that of water, a motor of corresponding large specification

must be used.

Motor:

Equipped with a fully enclosed, air-cooled, 2 pole or 4 pole extended shaft motor;

Insulation class:F

Protection:IP55

Supply voltage (±10%):1*220V/50Hz ; 3*220V/380V/50Hz

0.37kW ~ 2.2kW can provide single-phase motor products with built-in thermal protector.

Applications:

Water supply: water transport in waterworks, boosting of main pipeline.

Industrial boosting: process water system, cleaning system, wine-brewing and food system.

Industrial liquid transfer: boiler feed, cooling and air-conditioning system, condensate system, weak acids and weak alkali.

Water treatment: water transfer, swimming pool system.

Farmland irrigation, medical and health, petrochemical,aquafarming, etc.

MODEL	POWER	RATED HEAD (m)	RATED FLOW (m³/h)	US GPM	13	22	26	40	44	55	66	79	88	97	110	132	154	176	220	264	308	352	396	440	484	529	572	617	705	793	845	881	925	969	1057	1101	1233	1409	1497	1585	1762	1982
	KW			L/min	50	83	100	150	167	208	250	300	333	367	417	500	583	667	833	1000	1167	1333	1500	1667	1833	2000	2167	2333	2667	3000	3200	3333	3500	3667	4000	4167	4667	5333	5667	6000	6667	7500
	KW			m³/h	3	5	6	9	10	12.5	15	18	20	22	25	30	35	40	50	60	70	80	90	100	110	120	130	140	160	180	192	200	210	220	240	250	280	320	340	360	400	450
CCA50-32-160/1.1(T)	1.1	16.5	12.5	H(m)	21		20	18.5		16.5	15	12.5	10	8
CCA50-32-160/1.5(T)	1.5	20	12.5		26		24.5	22.5		20	18.5	15	12.5	9.5
CCA50-32-160/2.2(T)	2.2	26	12.5		30.5		29.5	27.5		26	24	22.5	20.5	18
CCA50-32-200/3.0T	3	34	12.5		38		37	35		34	32	30	28	26
CCA50-32-200/4.0T	4	45	12.5		51.5		50	48		45	43	41	39	30
CCA50-32-200/5.5T	5.5	54	12.5		62		60	58		54	52	47	42	37
CCA50-32-200/7.5T	7.5	62.5	12.5		68		66	64		62.5	62	60	58	57
CCA65-40-125/1.5(T)	1.5	13	25			20			19		17.5		16		13	10.5
CCA65-40-125/2.2(T)	2.2	20	25			27			26		24		22		20	17	14
CCA65-40-125/3.0T	3	25	25			31			30		29		27		25	22	18
CCA65-40-160/4.0T	4	31	25			39			38		36.5		34		31	28	24	19
CCA65-40-200/5.5T	5.5	41	25			47			46		45.5		44		41	38	34	30
CCA65-40-200/7.5T	7.5	48	25			52			51.5		51		50		48	45	42	38
CCA65-40-200/11T	11	68	25			69			69		68.5		68		68	66	64	60
CCA65-50-125/3.0T	3	16	40			27			26				23			20		16	10
CCA65-50-125/4.0T	4	21	40			28			27				26			24		21	16
CCA65-50-160/5.5T	5.5	24	50			34.5			34.5				34			31.5		28.5	24	20
CCA65-50-200/7.5T	7.5	32	50			41			41				40.5			39		36	32	27.5
CCA65-50-200/9.2T	9.2	41	50			52			52				51			49		45	41	37
CCA65-50-200/11T	11	48	50			57			56				55			53		51	48	42	30
CCA65-50-200/15T	15	62	50			69			68				67			65		64	62	57	50
CCA65-50-200/18.5T	18.5	68	50			73			72				71			70		69	68	65	59
CCA80-65-125/4.0T	4	13	80															19	18	17	15	13	11	9
CCA80-65-125/5.5T	5.5	13	100															22	21	20	19	18	17	13	12	10
CCA80-65-125/7.5T	7.5	19	100															27	26	25	24	23	22	19	18	15
CCA80-65-125/9.2T	9.2	23	100															30	29	29	28	27	26	23	22	21	19
CCA80-65-160/11T	11	30	100															36	35	34	33	32	31	30	27	25	22
CCA80-65-160/15T	15	37	100															44	43	42	40	39	38	37	36	34	32
CCA80-65-200/18.5T	18.5	47	100															53	52	51	50	49	48	47	45	44	41
CCA80-65-200/22T	22	50	100															60	59	58	57	56	51	50	48	44	41
CCA80-65-200/30T	30	62	100															72	72	71	70	69	65	62	61	60	59
CCA100-80-160/11T	11	15	160																	26		25		23		22		20	15	14	11
CCA100-80-160/15T	15	22	160																	35		33		31		29		27	22	21	20	18
CCA100-80-160/18.5T	18.5	28	160																	38		37		36		35		33	28	27	25	22
CCA100-80-200/22T	22	36	160																	46		44		42		40		38	36	31	29	26
CCA100-80-200/30T	30	45	160																	57		56		55		53		50	45	44	42	39
CCA100-80-200/37T	37	54	160																	66		65		63		61		59	54	53	51	48
CCA125-100-160/18.5T	18.5	25	180																			36		34.5		32.5		30.5	28	25		21.5	19
CCA125-100-160/22T	22	30	180																			39		38		37		34.5	32.5	30		26.5	25	23
CCA125-100-160/30T	30	35	200																			46.5		45.5		43.5		42	40	37		35	33	32	28	25
CCA125-100-200/37T	37	50	200																			54.5		54		54		54	53	52		50	49	47.5	44	28
CCA125-100-200/45T	45	57	200																			60.5		60.5		60.5		60	59	58.5		57	56	54.5	50	30
CCA125-100-200/55T	55	65	200																			71		70		69.5		69	68	66.5		65	63.5	62	57	40
CCA150-125-200/45T	45	35.5	320																					48		47			44.5			42			40		38	35.5	33.5	32	27	22
CCA150-125-200/55T	55	42	320																					54		53.5			51.5			50			46.5		44.5	42	40	38	33	25
CCA150-125-200/75T	75	49	320																					64		63			62			60			55		53	49	47	44	38	30
CCA150-125-200/90T	90	54	320																					71		70			69			66.5			61		59	54	52	49	42	35

NO.	NAME
1	Motor
2	O-Ring
3	Mechanical seal
4	Impeller
5	Pump body
6	Flat key
7	Drainage
8	Pump Cover
9	Pump shaft
10	Former SWiss
11	Locking screw

Back to list

Key words:

CCA Stainless Steel Centrifugal Pump(Monoblock with extended motor shaft)

CENTRIFUGAL PUMP